Now that you have all of your AX.25, NET/ROM and ROSE interfaces configured
and active, you should be able to make test calls.
The AX.25 Utilities package includes a program called `call' which
is a split screen terminal program for AX.25, NET/ROM and ROSE.
A simple AX.25 call would look like:
/usr/bin/call radio VK2DAY via VK2SUT |
A simple NET/ROM call to a node with an alias of SUNBBS would look like:
/usr/bin/call netrom SUNBBS |
A simple ROSE call to HEARD at node
5050882960 would look like:
/usr/bin/call rose HEARD 5050882960 |
Note: you must tell call which port you wish to
make the call on, as the same destination node might be reachable on
any of the ports you have configured.
The call program is a line mode terminal program for making
AX.25 calls. It recognizes lines that start with `˜' as command lines.
The `˜.' command will close the connection.
Please refer to the man page in /usr/man for more information.
Take our 
