3.1.1. Screen Readers

Screen readers are software applications that are installed on the computer to provide translation of the information on the computer screen to an audio output format. The translation is passed to the speech synthesizer and the words are spoken out loud. Currently, fully functional screen readers are only available for Linux in console mode. This section describes some of the most common screen readers.

• Emacspeak is the complete Audio Desktop is an excellent non-graphical, text based interface for users who are visually impaired. This application can be used as a screen reader in conjunction with a hardware synthesizer or IBM ViaVoice® Run-time text-to-speech application. More information and software packages of are available at: http://www.cs.cornell.edu/home/raman/emacspeak/. The Emacspeak HOWTO http://www.ibiblio.org/pub/Linux/docs/HOWTO/ includes a tutorial and installation guide.

• Jupiter Speech System is a screen reader for Linux in console mode. A user guide and software packages are available at: http://www.eklhad.net/linux/jupiter/.

• Screader is a screen reader for Linux in console mode that works with the Festival software speech synthesizer and the Accent hardware synthesizer. Information and downloads are available at: http://www.euronet.nl/~acj/eng-screader.html.

• Speaker is a new plugin for the Konqueror file manager and Web browser. Speaker provides Text to Speech using the Festival speech system or IBM ViaVoice. Downloads are available at: http://dogma.freebsd-uk.eu.org/~grrussel/speaker.html.

• Speakup is a screen review package for the Linux operating system. It requires a hardware speech synthesizer, such as the DecTalk Express. An installation boot disk and packages are available at: http://www.linux-speakup.org/ that allow a visually impaired user to install the Linux operating system.

• ZipSpeak is a talking mini-distribution of Linux. More information and software packages are available at: http://www.linux-speakup.org/zipspeak.html.

3.1.2. Speech Synthesizers

Speech synthesizers can be a hardware device or a text to speech (TTS) software application that creates the sounds necessary to provide speech output. Hardware synthesizers are available for the Linux operating system; however, they can be very expensive and must be compatible with the screen reader application in order to function properly. The alternative is to download and install a software synthesizer such as IBM's ViaVoice or Festival and configure the application to a compatible screen reader, such as Emacspeak.

3.1.3. Screen Magnifiers

Screen magnifiers enable users that are partially sighted to view selected areas of the screen in a manner similar to using a magnifying glass.

• GMag is a screen magnifier for X Windows. It provides continuous magnification while you work, as well as the option to change the contrast of images at run-time. More information and downloads are available at: http://projects.prosa.it/gmag/.

• Puff is a screen magnifier for users who need a high magnification of text and graphics in X Windows. Puff follows the focus of the mouse or pointer and enlarges the portion of the screen under the cursor. In order for Puff to run properly on Linux the source code needs to be modified. This application is not a good option for inexperienced users. The software packages and source code modification instructions are available at: http://trace.wisc.edu/world/computer_access/unix/unixshare.html.

• SVGATextmode enlarges or reduces the font size for users who perfer to work in console mode. The normal text screen that Linux provides is 80 characters across and 25 vertically. After SVGATextmode is installed, the text can be displayed much larger. One example would be 50 characters across and 15 vertically. The program does not offer the ablitity to zoom in and out, but the user can re-size when necessary. The most current download is available at: http://freshmeat.net/projects/svgatextmode/. Do not run try to run SVGATextmode from an X Windows terminal. You must be in console mode for the display to function properly.

• UnWindows is a collection of programs that includes Dynamag, a screen magnification program that helps the user locate the mouse pointer. The source code is available for Dynamag as a stand alone application, or the entire UnWindows package can be downloaded at: http://www.cs.rpi.edu/pub/unwindows/. The entire UnWindows package will not work with Linux without programming modifications. However, the Dynamag application can be installed successfully without any additional code changes.

• Xzoom is a screen magnifier similar to Xmag that allows the user to magnify rotate or mirror a portion of the screen. The most current download is available at: http://filewatcher.org/sec/xzoom.html.

3.1.4. Adjusting the Screen's Resolution

The X Windows server can be setup with different screen resolutions. The ability to adjust the screen's resolution allows a partially sighted user to magnify the screen with a single key sequence. The steps to set up your system are as follows:

1. Changed directories, type cd /etc

2. Using a text editor, open the XF86Config file

3. Locate the line beginning with Modes and change it to

   Modes "1280x1024" "1024x768" "800x600" "640x480" "320x240"

   Note: The settings may vary based your monitor's highest resolution mode.

4. Save the file and exit.

To enlarge the text on the screen type Ctrl+Alt+keypad-plus and to make the text smaller type Ctrl+Alt+keypad-minus

3.1.5. Braille Devices

Braille terminals are normally used by individuals who are totally blind and may be hearing impaired as well. A Braille display uses a series of pins to form Braille symbols that are continuously updated as the users changes focus. A Braille embosser is a hardware device for printing a hard copy of a text document in Braille. Braille translation software is required to translate the on-screen text to a Braille format.

3.1.6. Cursors for X Windows

Changing the shape and size of the mouse cursor can help users who have a problem following or seeing the cursor. The X Big Cursor mini HOWTO explains how to configure enlarged mouse cursors with the X Windows system. This HOWTO is available at: http://www.icewalk.com/doclib/howtos/mini/X-Big-Cursor.html.

There are also a large select of cursors that can be downloaded at: http://themes.tucows.com/cursors.html.

3.1.7. Audio

Audio can be very useful to users who are visually impaired. In most X Windows desktop environments audio alerts and sound events can be setup within the desktop control center by enabling sound and verifying that the option to show sound is activated. You will need to check the desktop users manual for setup and configuration of sound events.

Locktones is an excellent application for providing toggle keys that sound an audio alert to warn the user that a keystroke has created a locking state such as Cap Locks, or Num Locks. The application can be downloaded at: http://leb.net/pub/blinux/.

Linux can also be configured to beep at the login prompt so the user knows when to type in the password. A configuration utility can be downloaded and installed that can provide this function at: http://leb.net/pub/blinux/bootmeup/.

3.1.8. Additional Resources

• Access Mozilla has a goal to build an accessible Web suite: browser, e-mail, news, composer and chat that conform to the W3C accessibility standards. More information is available at: http://access-mozilla.sourceforge.net/.

• Blind + Linux = BLINUX provides documentation, downloads and a mailing list that focus on users who are blind. Information and software packages are available at: http://leb.net/blinux.

• LaTex/Tex is an extremely powerful document preparation system and it can be used to produce large print documents. More information is available at: http://www.emerson.emory.edu/services/latex/latex_toc.html.

• National Federation for the Blind's (NFB) purpose is to help blind persons achieve self-confidence and self-respect and to act as a vehicle for collective self expression by the blind. Information for blind users, as well as software are available at: http://www.nfb.org/.

• Project Ocularis is run by volunteers, and the project's aim is to improve Linux accessibility through the creation of new free software and the modification of pre-existing free software. More information is available at: http://ocularis.sourceforge.net.

• Screen is a standard piece of software that allows many different applications to run at the same time on a single terminal in console mode. Screen has been enhanced to support some Braille terminals directly. It is available for download at: http://www.icewalk.com/softlib/app/app_01508.html.

• SuSE Linux is the first Linux distribution to support installation of the Linux operating system and applications that run on Linux in Braille. The Blinux screen reader runs in the background to enable visually impaired users to work in a Linux console environment. More information is available at: http://www.suse.de/us/products/susesoft/70news/new_in_70.html.

• xocr is an optical character recognition program that scans written text, such as a book and translates it to audio output, so the information is available to visually impaired users. More information is available at: http://sal.unimedya.net.tr/Z/3/XOCR.html.