4.5. Configuring DOS using NCSA Telnet package
If you haven't installed your network card, do so now. Descriptions to
perform this task is beyond the scope of this document. Load the appropriate packet driver. For example: an NE2000 Ethernet card set
for I/O port 300 and IRQ 10, would need to be issued
nwpd 0x60 10 0x300 Make a new directory, and then unpack the NCSA Telnet package:
pkunzip tel2308b.zip Use a text editor to open the config.tel file Set myip=192.168.0.x (1 < x < 255), and
netmask=255.255.255.0 In this example, you should set hardware=packet, interrupt=10,
ioaddr=60 You should have at least one individual machine specified as the gateway,
i.e. the Linux host: name=default
host=yourlinuxhostname
hostip=192.168.0.1
gateway=1 |
Have another specified as a domain name service: name=dns.domain.com ; hostip=123.123.123.123; nameserver=1 |
Note: substitute the appropriate information about the DNS according what your
Linux host uses Save your config.tel file As an initial test, ping the Linux MASQ server to test the
network connection: ping 192.168.0.1 If you don't receive
any replies, please verify your network configuration.
| |
| |
Free eBook: 
