This document describes the Miniloader for Linux on Alpha AXP (MILO).
This firmware is used to initialize Alpha AXP based systems, load and
start Linux and, finally, provide PALcode for Linux. Please note that
the prefered way of booting Linux is via SRM console and MILO should
only be used if either there is no SRM console for your hardware (XL series)
or your current hardware isn't supported by SRM.
The Alpha Miniloader (MILO) HOWTO is copyright (C) 1995, 1996 David A Rusling, 2000 Richard D. Payne.
Copyright. Like all Linux HOWTO documents, it may be reproduced and distributed
in whole or in part, in any medium, physical or electronic, so long as
this copyright notice is retained on all copies.
Commercial redistribution is allowed and encouraged; however the author
would like to be notified of such distributions.
You may translate this HOWTO into any language whatsover provided that
you leave this copyright statement and disclaimer intact, and that you append
a notice stating who translated the document.
Disclaimer. While I have tried to include the most correct and
up to date information available to me, I cannot guarantee that usage
of information in this document does not result in loss of data or
equipment. I provide NO WARRENTY about the information in the HOWTO and
I cannot be made liable for any consequences resulting from using the
information in this HOWTO.
Free eBook: 
