Next
Previous
Contents
An NC, connected to your local Network, most likely by UTP, thus
by a cross-cable or HUB connecting to an X Server. Herafter called the
Linux Box. The NC can be used as an X-terminal, and in this way can be
used to replace an Windows Terminal server or simular application.
The NCD-ThinSTAR 200 is in way related to the IBM Network Station model 8361-100.
Both machines share a lot of components such as some S3 vga components, IO , network and
and
normal 72pins (parity ??) sims. The motherboard is also from the same manufacturer.
The NCD worked quit fine on my network at home, but we had some trouble to
get it running again on an other location. After a while we found out
that the problem where the monitors. The NC does not seem to support all older
monitors, even at low resolutions and refresh rates.
The Linux box does not require any special tricks: any X-server with xdm, gdm or
something similar will do. We will use xdm.
X Server.
Any machine running XDM with enough memory, processor power will do.
You don't need to have X configured on the machine itselve, it can
perfectly be a headless server. Basic X Windows install will provide
you with the necessary deamons.
DHCP Mini Howto on sunsite
Next
Previous
Contents
| 
Take our 
