Well, as in all things, that depends, (sigh). The options specified here
should work with most servers.
However, if it does NOT work, READ THE TEMPLATE FILE
(/etc/ppp/options.tpl) and the pppd man pages and
speak to the sysadmin/user support people who run the server to which
you are connecting.
You should also note that the connect scripts presented here also use
some command line options to pppd to make things a bit easier to change.
# /etc/ppp/options (NO PAP/CHAP)
#
# Prevent pppd from forking into the background
-detach
#
# use the modem control lines
modem
# use uucp style locks to ensure exclusive access to the serial device
lock
# use hardware flow control
crtscts
# create a default route for this connection in the routing table
defaultroute
# do NOT set up any "escaped" control sequences
asyncmap 0
# use a maximum transmission packet size of 552 bytes
mtu 552
# use a maximum receive packet size of 552 bytes
mru 552
#
#-------END OF SAMPLE /etc/ppp/options (no PAP/CHAP) |
Take our 
