SYSCALLS(2) Linux Programmer's Manual SYSCALLS(2)
NAME
none - list of all system calls
SYNOPSIS
Linux 2.4 system calls.
DESCRIPTION
The system call is the fundamental interface between an application and
the Linux kernel. As of Linux 2.4.17, there are 1100 system calls
listed in /usr/src/linux/include/asm-*/unistd.h. This man page lists
those that are common to most platforms (providing hyperlinks if you
read this with a browser).
_llseek(2), _newselect(2), _sysctl(2), accept(2), access(2), acct(2),
adjtimex(2), afs_syscall, alarm(2), bdflush(2), bind(2), break, brk(2),
cacheflush(2), capget(2), capset(2), chdir(2), chmod(2), chown(2),
chown32, chroot(2), clone(2), close(2), connect(2), creat(2), cre-
ate_module(2), delete_module(2), dup(2), dup2(2), execve(2), exit(2),
fchdir(2), fchmod(2), fchown(2), fchown32, fcntl(2), fcntl64, fdata-
sync(2), flock(2), fork(2), fstat(2), fstat64, fstatfs(2), fsync(2),
ftime, ftruncate(2), ftruncate64, get_kernel_syms(2), getcwd(2), get-
dents(2), getdents64, getegid(2), getegid32, geteuid(2), geteuid32,
getgid(2), getgid32, getgroups(2), getgroups32, getitimer(2), get-
pagesize(2), getpeername(2), getpmsg, getpgid(2), getpgrp(2), get-
pid(2), getppid(2), getpriority(2), getresgid(2), getresgid32, get-
resuid(2), getresuid32, getrlimit(2), getrusage(2), getsid(2), get-
sockname(2), getsockopt(2), gettid, gettimeofday(2), getuid(2), get-
uid32, gtty, idle, init_module(2), ioctl(2), ioperm(2), iopl(2),
ipc(2), kill(2), lchown(2), lchown32, link(2), listen(2), lock,
lseek(2), lstat(2), lstat64, madvise(2), mincore(2), mkdir(2),
mknod(2), mlock(2), mlockall(2), mmap(2), modify_ldt(2), mount(2),
mprotect(2), mpx, mremap(2), msync(2), munlock(2), munlockall(2), mun-
map(2), nanosleep(2), nfsservctl(2), nice(2), oldfstat, oldlstat,
oldolduname, oldstat, oldumount, olduname, open(2), pause(2), personal-
ity(2), phys, pipe(2), pivot_root(2), poll(2), prctl(2), pread(2),
prof, profil, ptrace(2), putpmsg, pwrite(2), query_module(2), quo-
tactl(2), read(2), readahead, readdir(2), readlink(2), readv(2),
reboot(2), recv(2), recvfrom(2), recvmsg(2), rename(2), rmdir(2),
rt_sigaction, rt_sigpending, rt_sigprocmask, rt_sigqueueinfo, rt_sigre-
turn, rt_sigsuspend, rt_sigtimedwait, sched_get_priority_max(2),
sched_get_priority_min(2), sched_getparam(2), sched_getscheduler(2),
sched_rr_get_interval(2), sched_setparam(2), sched_setscheduler(2),
sched_yield(2), security, select(2), sendfile(2), send(2), sendmsg(2),
sendto(2), setdomainname(2), setfsgid(2), setfsgid32, setfsuid(2), set-
fsuid32, setgid(2), setgid32, setgroups(2), setgroups32, set-
hostname(2), setitimer(2), setpgid(2), setpriority(2), setregid(2),
setregid32, setresgid(2), setresgid32, setresuid(2), setresuid32, set-
reuid(2), setreuid32, setrlimit(2), setsid(2), setsockopt(2), set-
timeofday(2), setuid(2), setuid32, setup(2), sgetmask(2), shutdown(2),
sigaction(2), sigaltstack(2), signal(2), sigpending(2), sigprocmask(2),
sigreturn(2), sigsuspend(2), socket(2), socketcall(2), socketpair(2),
ssetmask(2), stat(2), stat64, statfs(2), stime(2), stty, swapoff(2),
swapon(2), symlink(2), sync(2), sysfs(2), sysinfo(2), syslog(2),
time(2), times(2), truncate(2), truncate64, ulimit, umask(2),
umount(2), uname(2), unlink(2), uselib(2), ustat(2), utime(2),
vfork(2), vhangup(2), vm86(2), vm86old, wait4(2), waitpid(2), write(2),
writev(2).
Of the above, 9 are obsolete, namely getrlimit, oldfstat, oldlstat,
oldolduname, oldstat, olduname, readdir, select and vm86old (see also
obsolete(2)), and 15 are unimplemented in the standard kernel, namely
afs_syscall, break, ftime, getpmsg, gtty, idle, lock, mpx, phys, prof,
profil, putpmsg, security, stty and ulimit (see also unimplemented(2)).
However, ftime(3), profil(3) and ulimit(3) exist as library routines.
The slot for phys is in use since 2.1.116 for umount; phys will never
be implemented. The getpmsg and putpmsg calls are for kernels patched
to support streams, and may never be in the standard kernel. The secu-
rity call is for future use.
Roughly speaking, the code belonging to the system call with number
__NR_xxx defined in /usr/include/asm/unistd.h can be found in the ker-
nel source in the routine sys_xxx(). (The dispatch table for i386 can
be found in /usr/src/linux/arch/i386/kernel/entry.S.) There are many
exceptions, however, mostly because older system calls were superseded
by newer ones, and this has been treated somewhat unsystematically. On
platforms with proprietary OS emulation, such as parisc, sparc, sparc64
and alpha, there are many additional system calls; mips64 also contains
a full set of 32-bit system calls. Below the details for Linux 2.4.17.
The defines __NR_oldstat and __NR_stat refer to the routines sys_stat()
and sys_newstat(), and similarly for fstat and lstat. Similarly, the
defines __NR_oldolduname, __NR_olduname and __NR_uname refer to the
routines sys_olduname(), sys_uname() and sys_newuname(). Thus,
__NR_stat and __NR_uname have always referred to the latest version of
the system call, and the older ones are for backward compatibility.
It is different with select and mmap. These use five or more parame-
ters, and caused problems the way parameter passing on the i386 used to
be set up. Thus, while other architectures have sys_select() and
sys_mmap() corresponding to __NR_select and __NR_mmap, on i386 one
finds old_select() and old_mmap() (routines that use a pointer to a
parameter block) instead. These days passing five parameters is not a
problem any more, and there is a __NR__newselect (used by libc 6) that
corresponds directly to sys_select() and similarly __NR_mmap2.
Two other system call numbers, __NR__llseek and __NR__sysctl have an
additional underscore absent in sys_llseek() and sys_sysctl().
Then there is __NR_readdir corresponding to old_readdir(), which will
read at most one directory entry at a time, and is superseded by
sys_getdents().
On many platforms, including i386, socket calls are all multiplexed
through socketcall() and System V IPC calls through ipc().
On newer platforms that only have 64-bit file access and 32-bit uids
(e.g. alpha, ia64, s390x) there are no *64 or *32 calls. Where the *64
and *32 calls exist, the other versions are obsolete.
The chown and lchown system calls were swapped in 2.1.81. The *64 and
*32 calls were added for kernel 2.4, as were the new versions of getr-
limit and mmap, and the new calls pivot_root, mincore, madvise, secu-
rity, gettid and readahead.
Linux 2.4 2002-01-07 SYSCALLS(2)
Take our 
